BC PE Grout-2

Product Description :

BC PE Grout is a two-component, polyester resin based, anchoring grout. It consists of a low viscosity polyester resin plus a catalysed filler.

The two components are mixed to produce a filled resin grout, which may be poured or pumped into suitably prepared anchor holes.

The mixed grout is coloured dark grey and is used for downward facing holes where the hole diameter is up to 25mm greater than the bolt or bar diameter.

The Product is used for the fixing of steel bolts into pre-drilled holes within concrete, rock, brickwork, stonework, masonry and other substrates capable of supporting the required load.

Available in both winter and summer formulations, giving a wide range of application temperatures.

Uses

BC PE Grout may only be used by experienced pro fessionals. The Product can be used with the following:

Mixing

Place contents of resin can into a plastic container or pail. Slowly add catalysed filler whilst mixing. Continue mixing until a uniform colour is achieved (approxim- ately 2 minutes). Correct mix proportioning must be used to achieve the designed anchor strength.

Application

Pour mixed grout into prepared holes, rodding if ne- cessary to ensure grout flows to the bottom of the hole. Once grout has been placed insert bar into hole and gently twist and press home to the required depth. The bar should be left undisturbed until the grout has hardened.

Packaging:

20 Kg .